| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.438 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.156 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.438 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.219 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.734 INCHES MINIMUM AND 2.766 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.625 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.734 INCHES MINIMUM AND 2.766 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.438 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.219 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG THICKNESS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| SECOND LEG WIDTH | 2.434 INCHES MINIMUM AND 2.516 INCHES MAXIMUM |
| SPECIAL FEATURES | ONE ADDITIONAL SLOT IN FIRST LEG 0.219 IN. WIDE BY 0.438 IN. LG |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 595 FED STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL |