|
|
|
National Stock Number:
5340-00-133-8139
Federal Supply Class:
5340
National Item Identification Number:
001338139
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 8386978 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 3.813 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.179 INCHES NOMINAL | | CENTER SECTION WIDTH | 2.313 INCHES MINIMUM AND 3.688 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.125 INCHES NOMINAL | | FIRST LEG ANGLE | 0.2 RADIANS NOMINAL | | FIRST LEG LENGTH | 2.031 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.813 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.938 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.179 INCHES NOMINAL | | FIRST LEG WIDTH | 2.313 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-636,COND 2 TO 5 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.156 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.375 INCHES NOMINAL | | SECOND LEG ANGLE | 0.2 RADIANS NOMINAL | | SECOND LEG LENGTH | 2.000 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG SLOT LENGTH | 0.875 INCHES NOMINAL | | SECOND LEG SLOT WIDTH | 0.438 INCHES NOMINAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | SECOND LEG THICKNESS | 0.179 INCHES NOMINAL | | SECOND LEG WIDTH | 3.688 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-489 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ENAMEL |
|
|