| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.375 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.187 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.187 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.563 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.215 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.125 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.675 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG END WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| SPECIAL FEATURES | TWO SLOTTED HOLES 0.125 IN. W,0.215 IN. LG ON 0.375 IN. CENTER TO CENTER DIM. IN FIRST LEG |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 CL 4 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | OXIDE |