| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.682 INCHES MINIMUM AND 0.692 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.051 INCHES MINIMUM AND 0.071 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG END WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |