| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.070 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 0.850 INCHES MINIMUM AND 0.970 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 0.600 INCHES MINIMUM AND 0.720 INCHES MAXIMUM |
| SECOND LEG LENGTH | 2.570 INCHES MINIMUM AND 2.630 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | CADMIUM |