|
|
|
National Stock Number:
5340-00-134-4854
Federal Supply Class:
5340
National Item Identification Number:
001344854
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 206-062-522-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.750 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.032 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.310 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.230 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.230 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.178 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.590 INCHES NOMINAL | | FIRST LEG END WIDTH | 0.970 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM | | FIRST LEG STYLE | ANGLE | | FIRST LEG THICKNESS | 0.032 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 TEMP 0 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG CUTOUT WIDTH | 0.820 INCHES NOMINAL | | SECOND LEG LENGTH | 1.282 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CUT OUT | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG THICKNESS | 0.032 INCHES NOMINAL | | SECOND LEG WIDTH | 1.310 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|