| FIRST LEG ANGLE | 0.15 RADIANS MINIMUM AND 0.25 RADIANS MAXIMUM |
| FIRST LEG CORNER RADIUS | 0.3600 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.4400 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.6500 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.5000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.2500 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.7200 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.1970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-B-308 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.0000 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.0000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.1920 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.1970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.3600 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.3600 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.2500 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.7200 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171, FINISH 7.3.1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |