| CENTER SECTION HEIGHT | 0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.452 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.250 INCHES MAXIMUM |
| FIRST LEG LENGTH | 72.0 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5510 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | GANG CHANNEL |
| MATERIAL | STEEL CORROSION RESISTING |
| SPECIAL FEATURES | BOTH LEGS HAVE NOTCHED SLIDES THAT ARE 0.065/0.075 WIDE BY 0.195/0.205 LONG ALONG THE LENGTH;CENTER OF BRACKET HAS HOLES TO ACCOMODATE NUT;CENTER TO CENTER NUT HOLE MEASUREMENT OF 2.00 INCHES TO ACCOMODATE 0.1900-32 UNJF-3B NUT |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG WIDTH | 0.298 INCHES MAXIMUM |
| SECOND LEG LENGTH | 72.0 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC 1ST TREATMENT RESPONSE AND TWO COATS OF MIL-P-85582,TY 1,CLASS C2 PRIMER IAW MIL-F-7179 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE AND PRIMER |