| CENTER SECTION THICKNESS | 1.160 INCHES NOMINAL |
| CENTER SECTION WIDTH | 1.160 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 1.660 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 2.810 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.100 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.660 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.535 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.580 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG WIDTH | 1.160 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A1008 CLASS CS, TYPE B ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL THICKNESS | 0.125 INCHES NOMINAL |
| MATERIAL | STEEL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, MULTIPLE ANGLE, HOLDER |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE DIAMETER | 0.31 INCHES MINIMUM AND 0.60 INCHES MAXIMUM |
| OVERALL HEIGHT | 3.44 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.250 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.100 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.310 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.125 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.630 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.580 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.160 INCHES NOMINAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-53022 TYPE 4 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-DTL 53039 TYPE 3 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER EPOXY |