|
|
|
National Stock Number:
5340-01-628-4867
Federal Supply Class:
5340
National Item Identification Number:
016284867
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 06A8124125 | 5B5M3 | EDGEWOOD CHEMICAL BIOLOGICAL CENTER DIV DEPT OF ARMY |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 5.00 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.50 INCHES NOMINAL | | FIRST LEG ANGLE | 25.0 RADIANS NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 4.00 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.50 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.26 INCHES NOMINAL | | FIRST LEG WIDTH | 1.50 INCHES NOMINAL | | FIRST LEG LENGTH | 5.00 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | HOLE QUANTITY | 2 | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B221 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | MIDDLE LIGHT BRACKET | | PROPRIETARY CHARACTERISTICS | NPAC | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 25.0 RADIANS NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG LENGTH | 5.00 INCHES NOMINAL | | SPECIAL FEATURES | SECOND LEG HAS 1.00 INCH ON EACH SIDE CUT OUT TO A RADIUS OF 30 LEAVING THE INSIDE CORNER ROUNDED | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|