|
|
|
National Stock Number:
5342-01-317-7512
Federal Supply Class:
5342
National Item Identification Number:
013177512
Description:
COUPLING,CLAMP,GROOVED
Detail:
A metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
|
Manufacturer Information:
| 364497-3 | 59364 | HONEYWELL INTERNATIONAL INC. | | 364497-3 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BAND WIDTH | 0.750 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | GROOVED RETAINER | | HEIGHT | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | INCLUDED ANGLE IN DEG | 19.5 | | INSIDE DIAMETER | 9.410 INCHES MINIMUM AND 9.470 INCHES MAXIMUM | | LATCH STYLE | SINGLE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE T BOLT | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE TRUNNION | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525E A286 ASSN STD SINGLE MATERIAL RESPONSE QUICK COUPLE CUP | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059, TYPE 301, 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE BAND | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059, TYPE 301, 1/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE RETAINER | | MATERIAL | IRON ALLOY 660 QUICK COUPLE CUP | | MATERIAL | IRON ALLOY 660 TRUNNION | | MATERIAL | IRON ALLOY 660 T BOLT | | MATERIAL | STEEL COMP 301 BAND | | MATERIAL | STEEL COMP 301 RETAINER | | MATERIAL | STEEL CORROSION RESISTING NUT | | NUT TYPE | PLAIN CASTELLATED HEXAGON | | RETAINER WIDTH | 0.750 INCHES MAXIMUM | | ROOT WIDTH | 0.354 INCHES MINIMUM AND 0.364 INCHES MAXIMUM | | SEALING INNER LINER | NOT INCLUDED | | SHAPE | ROUND | | SPECIAL FEATURES | MATERIAL THICKNESS OFBAND AND RETAINER SHALL BE ADEQUATE TO SUSTAIN AN AXIAL LOAD OF 25590 POUNDS W/O PERMANENT DEFORMATION |
|
|