5365-00-038-3999, SPACER,PLATE

National Stock Number:
5365-00-038-3999

Federal Supply Class:
5365

National Item Identification Number:
000383999

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

F310936-57

82918

THE BOEING COMPANY

Techincal Specification:

BOLT HOLE QUANTITY	2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM
HOLE DIAMETER	0.328 INCHES MINIMUM AND 0.343 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.340 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.340 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.750 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
OVERALL LENGTH	3.350 INCHES MINIMUM AND 3.410 INCHES MAXIMUM
OVERALL WIDTH	1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
SPECIAL FEATURES	TWO CORNERS AT ONE END BEVELED
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-STD-808,F221 LG FED STD SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	PAINT

Click here to Register for Free 30-day Trial