|
|
|
National Stock Number:
5365-00-061-8793
Federal Supply Class:
5365
National Item Identification Number:
000618793
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 868072-25 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 2.980 INCHES MINIMUM AND 3.020 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 3.440 INCHES MINIMUM AND 3.480 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 5 | | HOLE DIAMETER | 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.230 INCHES NOMINAL | | OVERALL WIDTH | 3.900 INCHES MINIMUM AND 3.940 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | SIDE RADIUS FROM BOLT CIRCLE | 3.670 INCHES MINIMUM AND 3.710 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE |
|
|