|
|
|
National Stock Number:
5365-00-068-7009
Federal Supply Class:
5365
National Item Identification Number:
000687009
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 515831-1 | 70210 | HONEYWELL INTERNATIONAL INC. | | 515831-1 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO |
|
Techincal Specification:
| APERTURE DIAMETER | 1.125 INCHES MINIMUM AND 1.130 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 1.455 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CONSTRUCTION | ONE-PIECE | | FSC APPLICATION DATA | MOTOR,ACTUATOR,AIRCRAFT | | HOLE DIAMETER | 0.120 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | OVERALL WIDTH | 1.695 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SIDE RADIUS FROM GASKET CENTER | 0.617 INCHES NOMINAL | | STYLE DESIGNATOR | MARINE SQUARE W/O BOLT HOLES | | SURFACE TREATMENT | CADMIUM |
|
|