|
|
|
National Stock Number:
5365-00-072-4698
Federal Supply Class:
5365
National Item Identification Number:
000724698
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 536-04CMSP | 50027 | UNDERSEA SENSOR SYSTEMS INC | | S8154-100C002 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.376 INCHES MINIMUM AND 0.386 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, SPECIAL STEEL SHIM STOCK | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | OVERALL THICKNESS | 0.002 INCHES NOMINAL | | STYLE DESIGNATOR | CIRCULAR | | SURFACE TREATMENT | PASSIVATE |
|
|