|
|
|
National Stock Number:
5365-00-075-3346
Federal Supply Class:
5365
National Item Identification Number:
000753346
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 2223887-2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | L313002522 | 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
|
Techincal Specification:
| APERTURE DIAMETER | 1.250 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.395 INCHES MINIMUM AND 2.405 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.525 INCHES MINIMUM AND 1.535 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.180 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.144 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.141 INCHES NOMINAL | | OVERALL LENGTH | 2.688 INCHES NOMINAL | | OVERALL WIDTH | 1.812 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 | | SPECIAL FEATURES | TWO HOLES,0.126 IN. MIN DIA TO 0.129 IN. MAX DIA,ONE ON EACH SIDE IN THE CENTER ALONG THE WIDTH | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|