|
|
|
National Stock Number:
5365-00-081-5124
Federal Supply Class:
5365
National Item Identification Number:
000815124
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 15050449 | 0LRM3 | TEREX USA, LLC | | 3739160 | 97907 | TEREX CORP | | 43588 | 81142 | EATON CORP AXLE DIV |
|
Techincal Specification:
| APERTURE DIAMETER | 5.125 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 6.500 INCHES NOMINAL | | BOLT HOLE QUANTITY | 6 | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.594 INCHES NOMINAL | | OUTSIDE DIAMETER | 7.750 INCHES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | ONE 0.188 IN. DIA HOLE ON BOLT CIRCLE,TWO 0.500 IN. W BY 0.500 IN. LG KEYWAYS ON ID |
|
|