|
|
|
National Stock Number:
5365-00-085-9870
Federal Supply Class:
5365
National Item Identification Number:
000859870
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 718834-6 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 1.308 INCHES MINIMUM AND 1.322 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 1.670 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | HOLE DIAMETER | 0.211 INCHES MINIMUM AND 0.218 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL WIDTH | 2.025 INCHES MINIMUM AND 2.035 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 410 | | SIDE RADIUS FROM GASKET CENTER | 0.750 INCHES NOMINAL | | SPECIAL FEATURES | GAP IN SPACER SIDE,APPROXIMATELY 1/4 OF CIRCUMFERENCE |
|
|