|
|
|
National Stock Number:
5365-00-105-6755
Federal Supply Class:
5365
National Item Identification Number:
001056755
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 123CSM11840-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123CSM11840-1 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123CSM11840-1 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| FSC APPLICATION DATA | RUDDER,AIRCRAFT | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM | | INSIDE DIAMETER | 2.062 INCHES MINIMUM AND 2.066 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.438 INCHES NOMINAL | | OVERALL THICKNESS | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8844 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4340 | | SURFACE FINISH | 125.0 MICROINCHES LARGEST OUTSIDE DIAMETER | | SURFACE FINISH | 125.0 MICROINCHES LEFT SIDE | | SURFACE TREATMENT | CADMIUM |
|
|