|
|
|
National Stock Number:
5365-00-118-9204
Federal Supply Class:
5365
National Item Identification Number:
001189204
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 32905 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 10 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.593 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | OVERALL LENGTH | 8.359 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5062 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | FLANGE OD 5.219 IN.; BODY OD 2.812 IN.; FLANGE W 1.219 IN.; 1.5 R BETWEEN BODY AND FLANGE; CENTERED INVERTED RADIUS ALONG FLANGE WIDTH 1.016 R; BODY HOLE DIAMETER: 1 ELONGATED HOLE 0.563 IN. TO 0.625 IN. DIA; 0.375 IN. DIA-1 HOLE; 0.406 IN. DIA-5 HOLES; 0.531 IN. DIA-2 HOLES |
|
|