|
|
|
National Stock Number:
5365-00-119-6160
Federal Supply Class:
5365
National Item Identification Number:
001196160
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 53599 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| APERTURE LENGTH | 3.890 INCHES MINIMUM AND 3.910 INCHES MAXIMUM | | APERTURE WIDTH | 1.499 INCHES MINIMUM AND 1.519 INCHES MAXIMUM | | BEARING SURFACE WIDTH | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | HS 132,GRADE 4,FSCM 73030 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | SHARP EDGES ON BOTH LONGITUDINAL LENGTHS AND CONCENTRIC CONCAVE CURVATURES ON 9.0781 IN. RADIUS THAT ARE 1.1878 IN. LONG EITHER SIDE OF VERTICAL CENTERLINE AND SINGLE END OPENING .250 IN. EITHER SIDE OF 9.078 IN. HORIZONTAL RADIUS CENTERLINE AND SIDE HEIGHT ADJACENT TO OPENING .312 IN. EXTENDING 1.187 IN. EITHER SIDE OF VERTICAL CENTERLINE | | STYLE DESIGNATOR | OVAL W/O BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | HS 74,FSCM 73030 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|