|
|
|
National Stock Number:
5365-00-126-2471
Federal Supply Class:
5365
National Item Identification Number:
001262471
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 11586593-3 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| APERTURE WIDTH | 1.380 INCHES MINIMUM AND 1.420 INCHES MAXIMUM | | APERTURE LENGTH | 1.730 INCHES MINIMUM AND 1.750 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.870 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES NOMINAL | | HOLE DIAMETER | 0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | INSIDE CORNER RADIUS | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM | | OVERALL LENGTH | 2.240 INCHES MINIMUM AND 2.300 INCHES MAXIMUM | | OVERALL WIDTH | 2.230 INCHES MINIMUM AND 2.250 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT | CHROMATE |
|
|