5365-01-022-2323, SPACER,PLATE

National Stock Number:
5365-01-022-2323

Federal Supply Class:
5365

National Item Identification Number:
010222323

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

S1119-1	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
S1119-1	61174	NORTHROP GRUMMAN SYSTEMS CORPORATION
S1119-1	79RG9	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

APERTURE DIAMETER	0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM
HOLE DIAMETER	0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
OVERALL LENGTH	1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
OVERALL WIDTH	1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/12,T6 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
OUTSIDE CORNER RADIUS	0.260 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SPECIAL FEATURES	RIM AROUND APERTURE 0.020 IN. MIN 0.050 IN. MAX THK
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	ANODIZE

Click here to Register for Free 30-day Trial