|
|
|
National Stock Number:
5905-00-042-9400
Federal Supply Class:
5905
National Item Identification Number:
000429400
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| CM43693-1 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | MIL-PRF-94/5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILR94-5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RV4SBYSD104A | 01121 | ROCKWELL AUTOMATION, INC. | | RV4SBYSD104A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY DIAMETER | 1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM | | BODY LENGTH | 0.719 INCHES MINIMUM AND 0.969 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | OVERALL DIAMETER | 1.515 INCHES MAXIMUM | | OVERALL LENGTH | 1.750 INCHES MINIMUM AND 2.109 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.360 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING W/PANEL SEAL | | NONTURN DEVICE RADIUS | 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM | | OPERATING POSITION | START OF ROTATION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 330.0 MINIMUM AND 340.0 MAXIMUM | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT LENGTH | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC | | SWITCH TYPE | ROTARY | | SWITCH VOLTAGE RATING IN VOLTS | 117.0 | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
|
|