5935-00-045-6917 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5950-00-045-6919 TRANSFORMER,POWER

National Stock Number:
5905-00-045-6918

Federal Supply Class:
5905

National Item Identification Number:
000456918

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
6080256367PARMA INDUSTRIES INC
757-621604454SENSOR SYSTEMS, L.L.C.
77C707991P001REVD03538LOCKHEED MARTIN CORPORATION
77C707991PT103538LOCKHEED MARTIN CORPORATION


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION353.0 MINIMUM AND 358.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION1.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY DIAMETER1.747 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
BODY LENGTH1.044 INCHES NOMINAL
BODY STYLECYLINDRICAL SERVO MOUNTED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.30 TO 0.30 SINGLE SECTION
LATERAL RUNOUT0.002 INCHES
OVERALL DIAMETER1.919 INCHES MINIMUM AND 1.922 INCHES MAXIMUM
OVERALL LENGTH1.853 INCHES MINIMUM AND 1.921 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE0.30 INCH-OUNCES
MAXIMUM STARTING TORQUE0.30 INCH-OUNCES
MOUNTING LIP DEPTH0.0900 INCHES MINIMUM
MOUNTING LIP DIAMETER1.7470 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
PILOT DIAMETER1.5615 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM
PILOT LENGTH0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM
PILOT DIAMETER RUNOUT0.001 INCHES
POWER DISSIPATION RATING PER SECTION IN WATTS4.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT BEARING TYPEBALL
SHAFT DIAMETER0.187 INCHES NOMINAL
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND
SHAFT LENGTH0.843 INCHES MINIMUM AND 0.916 INCHES MAXIMUM
TERMINAL LENGTH0.172 INCHES NOMINAL
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
UNDERCUT DIAMETER1.561 INCHES MINIMUM AND 1.562 INCHES MAXIMUM
UNDERCUT WIDTH0.0780 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us