5905-00-056-4293 RESISTOR,VARIABLE,WIRE WOUND,NON Index 9150-00-056-4307 PENETRATING OIL

National Stock Number:
5905-00-056-4295

Federal Supply Class:
5905

National Item Identification Number:
000564295

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
116FTS25908815HONEYWELL INTERNATIONAL INC
577R900H1297942NORTHROP GRUMMAN SYSTEMS CORPORATION
752-624012205BUNKER RAMO CORP AMPHENOL CONTROLS DIV
A09104454SENSOR SYSTEMS, L.L.C.


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION340.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS 1ST SECTION
ELECTRICAL RESISTANCE PER SECTION2.0 KILOHMS 9TH SECTION
ELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS 5TH SECTION
ELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS 6TH SECTION
ELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS 7TH SECTION
ELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS 8TH SECTION
ELECTRICAL RESISTANCE PER SECTION30.0 KILOHMS 10TH SECTION
ELECTRICAL RESISTANCE PER SECTION30.0 KILOHMS 11TH SECTION
ELECTRICAL RESISTANCE PER SECTION30.0 KILOHMS 3RD SECTION
ELECTRICAL RESISTANCE PER SECTION7.5 KILOHMS 2ND SECTION
ELECTRICAL RESISTANCE PER SECTION7.5 KILOHMS 4TH SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER100.0 ALL SECTIONS
BODY DIAMETER1.062 INCHES NOMINAL
BODY LENGTH2.680 INCHES NOMINAL
BODY STYLECYLINDRICAL SERVO MOUNTED
FIRST FLAT LENGTH0.375 INCHES NOMINAL
FIXED TAP QUANTITY PER SECTION2 6TH SECTION
FIXED TAP QUANTITY PER SECTION2 8TH SECTION
FIXED TAP QUANTITY PER SECTION1 5TH SECTION
FIXED TAP QUANTITY PER SECTION1 7TH SECTION
FIXED TAP QUANTITY PER SECTION3 2ND SECTION
FIXED TAP QUANTITY PER SECTION3 4TH SECTION
FLAT HEIGHT0.105 INCHES NOMINAL
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS EQUATION
FUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 1ST SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.30 TO 0.30 11TH SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.65 TO 0.65 10TH SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.65 TO 0.65 3RD SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.00 TO 1.00 2ND SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.00 TO 1.00 4TH SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.50 TO 1.50 5TH SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.50 TO 1.50 6TH SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.50 TO 1.50 7TH SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.50 TO 1.50 8TH SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-2.00 TO 2.00 9TH SECTION
LATERAL RUNOUT0.001 INCHES
MAXIMUM RUNNING TORQUE3.45 INCH-OUNCES
MAXIMUM STARTING TORQUE3.45 INCH-OUNCES
MAXIMUM STOP TORQUE32.00 INCH-OUNCES
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER1.0750 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
PILOT DIAMETER0.9688 INCHES NOMINAL
PILOT LENGTH0.6200 INCHES NOMINAL
PILOT DIAMETER RUNOUT0.001 INCHES
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR ALL SECTIONS
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY11
SHAFT BEARING TYPEBALL
SHAFT END PLAY0.005 INCHES
SHAFT DIAMETER0.1247 INCHES NOMINAL
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND, FLATTED
SHAFT LENGTH0.437 INCHES NOMINAL
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION156.36 7TH SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION156.36 8TH SECTION AND 232.72 8TH SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION156.36 5TH SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION156.36 6TH SECTION AND 232.72 6TH SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION38.17 2ND SECTION AND 87.27 2ND SECTION AND 136.37 2ND SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION38.17 4TH SECTION AND 87.27 4TH SECTION AND 136.37 4TH SECTION
TAP LOCATION TOLERANCE PER SECTION-2.0 TO 2.0 DEG ANGULAR ROTATION ALL SECTIONS
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-400.0 TO 400.0 ALL SECTIONS
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY45 TURRET
TEST DATA DOCUMENT97942-577R900 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
UNDERCUT DIAMETER0.968 INCHES NOMINAL
UNDERCUT WIDTH0.0570 INCHES MINIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us