| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BODY DIAMETER | 1.453 INCHES MAXIMUM |
| BODY LENGTH | 1.100 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05 TO 0.05 SINGLE SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| OVERALL DIAMETER | 1.709 INCHES MAXIMUM |
| OVERALL LENGTH | 1.866 INCHES NOMINAL |
| MAXIMUM STARTING TORQUE | 0.70 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.041 |
| MOUNTING LIP DEPTH | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.4320 INCHES MINIMUM AND 1.4420 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| PILOT LENGTH | 0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT BEARING TYPE | BALL |
| SHAFT DIAMETER | 0.120 INCHES NOMINAL |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 228.0 SINGLE SECTION AND 219.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 8 TURRET |
| TEST DATA DOCUMENT | 03538-7648736 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.315 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |