|
|
|
National Stock Number:
5905-00-060-3608
Federal Supply Class:
5905
National Item Identification Number:
000603608
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| MIL-R-93/5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RB18CE52302F | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| TEST DATA DOCUMENT | 81349-MIL-R-93 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-93/5 GOVERNMENT SPECIFICATION | | ELECTRICAL RESISTANCE | 523.000 KILOHMS | | POWER DISSIPATION RATING IN WATTS | 0.750 FREE AIR | | TERMINAL LENGTH | 0.313 INCHES MINIMUM AND 0.437 INCHES MAXIMUM | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0 TO 145.0 | | BODY LENGTH | 1.188 INCHES MINIMUM AND 1.312 INCHES MAXIMUM | | AMBIENT TEMP AT FULL RATED POWER | 125.0 DEG CELSIUS | | BODY DIAMETER | 0.562 INCHES MINIMUM AND 0.938 INCHES MAXIMUM | | STYLE DESIGNATOR | RADIAL TERMINAL EACH END | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | CUBIC MEASURE | 0.907 CUBIC INCHES | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -20.0 TO 20.0 | | TERMINAL TYPE | TAB, SOLDER LUG | | INCLOSURE TYPE | ENCAPSULATED |
|
|