|
|
|
National Stock Number:
5905-00-061-2154
Federal Supply Class:
5905
National Item Identification Number:
000612154
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 116FTS116Z | 08815 | HONEYWELL INTERNATIONAL INC | | 539D763P1 | 89954 | BAE SYSTEMS CONTROLS INC. | | 9106 | 04454 | SENSOR SYSTEMS, L.L.C. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 115.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY DIAMETER | 1.000 INCHES MAXIMUM | | BODY LENGTH | 0.812 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FEATURES PROVIDED | NONMETALLIC SHAFT | | LATERAL RUNOUT | 0.002 INCHES | | OVERALL DIAMETER | 1.362 INCHES MAXIMUM | | OVERALL LENGTH | 1.462 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.15 | | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.09500 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 0.96880 INCHES MAXIMUM | | PILOT LENGTH | 0.06200 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.125 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BALL | | SHAFT END PLAY | 0.00200 INCHES | | SHAFT DIAMETER | 0.1246 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.0007 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT LENGTH | 0.620 INCHES NOMINAL | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -500.0 TO 500.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TEST DATA DOCUMENT | 89954-539D763 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.000 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.05700 INCHES MINIMUM |
|
|