| ELECTRICAL RESISTANCE PER SECTION | 200.000 OHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| BODY HEIGHT | 0.240 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| BODY LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| BODY WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.375 INCHES NOMINAL |
| OVERALL HEIGHT | 0.437 INCHES MINIMUM AND 0.457 INCHES MAXIMUM |
| OVERALL LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| OVERALL WIDTH | 0.444 INCHES MINIMUM AND 0.465 INCHES MAXIMUM |
| MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | 0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| MOUNTING METHOD | UNTHREADED HOLE |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| SECTION QUANTITY | 1 |
| SHAFT LENGTH | 0.060 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| SHAFT STYLE | ROUND, SLOTTED |
| SPECIAL FEATURES | MTG HOLES LOCATED DIAGONALLY OPPOSITE ONPLANE FORMED BY LENGTH NAD WIDTH,PIN DIA 0.031 IN. PLUS 0.0 MINUS 0.003 |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| TERMINAL LOCATION | LEFT ADJACENT SIDE SINGLE ROW |
| TERMINAL TYPE AND QUANTITY | 3 PIN |