|
|
|
National Stock Number:
5905-00-066-3270
Federal Supply Class:
5905
National Item Identification Number:
000663270
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1200-599 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 1200-599 | 18802 | LANDIS AND GYR METERING INC | | 2JC3643H04REVAA | 79500 | WESTINGHOUSE ELECTRIC CORP | | 55-50-265 | 18065 | SAMARIUS PRECISION INSTRUMENTS, INC. | | 700-8119 | 02111 | VISHAY SPRAGUE INC | | 751-6067 | 12205 | BUNKER RAMO CORP AMPHENOL CONTROLS DIV | | 751-6067 | 19176 | SERVO INSTRUMENT CORPORATION | | 78WS228 | 08815 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 127.0 MINIMUM | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY DIAMETER | 0.875 INCHES MAXIMUM | | BODY LENGTH | 0.685 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | LATERAL RUNOUT | 0.0015 INCHES | | OVERALL DIAMETER | 1.250 INCHES MAXIMUM | | OVERALL LENGTH | 1.095 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 0.25 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 0.7500 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BEARING | | SHAFT END PLAY | 0.002 INCHES | | SHAFT DIAMETER | 0.1249 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.410 INCHES NOMINAL | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | TEST DATA DOCUMENT | 79500-2JC3643 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 0.750 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
|
|