|
|
|
National Stock Number:
5905-00-071-3804
Federal Supply Class:
5905
National Item Identification Number:
000713804
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 534908 | 64547 | HONEYWELL INTERNATIONAL, INC | | 534908 | 70210 | HONEYWELL INTERNATIONAL INC. | | 534908 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 129.000 KILOHMS 1ST SECTION AND 15.000 KILOHMS 2ND SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 121.0 SINGLE SECTION | | BODY DIAMETER | 1.450 INCHES MAXIMUM | | BODY LENGTH | 1.539 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FEATURES PROVIDED | NONMETALLIC SHAFT | | LATERAL RUNOUT | 0.001 INCHES | | OVERALL LENGTH | 2.194 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.08800 INCHES MINIMUM AND 0.09800 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.42000 INCHES MINIMUM AND 1.45000 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING | | PILOT LENGTH | 0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 1ST SECTION AND -5.0 TO 5.0 2ND SECTION | | SECTION QUANTITY | 2 | | SHAFT BEARING TYPE | BALL | | SHAFT END PLAY | 0.00500 INCHES | | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM | | SHAFT RADIAL PLAY | 0.0015 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.588 INCHES NOMINAL | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 5 TURRET | | UNDERCUT WIDTH | 0.06200 INCHES MINIMUM |
|
|