| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BODY DIAMETER | 1.062 INCHES NOMINAL |
| BODY LENGTH | 1.880 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CUBIC MEASURE | 1.403 CUBIC INCHES |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FIRST FLAT LENGTH | 0.377 INCHES NOMINAL |
| FLAT HEIGHT | 0.104 INCHES MINIMUM AND 0.106 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| MAXIMUM RUNNING TORQUE | 0.35 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.35 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 320.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT BEARING TYPE | BEARING |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT DIAMETER | 0.1242 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND, FLATTED |
| SHAFT LENGTH | 0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 TURRET |
| TEST DATA DOCUMENT | 97942-577R900 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 0.9683 INCHES MINIMUM AND 0.9690 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |