| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS 1ST SECTION AND 4.0 KILOHMS 2ND SECTION AND 4.0 KILOHMS 3RD SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| BODY DIAMETER | 1.156 INCHES MAXIMUM |
| BODY LENGTH | 1.700 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20 TO 0.20 ALL SECTIONS |
| LATERAL RUNOUT | 0.001 INCHES |
| OVERALL DIAMETER | 1.156 INCHES MAXIMUM |
| OVERALL LENGTH | 2.138 INCHES NOMINAL |
| MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0600 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 3 |
| SHAFT BEARING TYPE | BEARING |
| SHAFT END PLAY | 0.002 INCHES |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.0006 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| SHAFT LENGTH | 0.500 INCHES NOMINAL |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 400.0 ALL SECTIONS |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -300.0 TO 300.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 12 SOLDER STUD |
| UNDERCUT DIAMETER | 0.970 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0600 INCHES NOMINAL |