|
|
|
National Stock Number:
5905-00-076-1553
Federal Supply Class:
5905
National Item Identification Number:
000761553
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 6490-60257-101 | 78286 | SIKORSKY AIRCRAFT CORPORATION | | CM23272 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 30.0 OHMS ALL SECTIONS | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 2.120 INCHES MAXIMUM | | BODY LENGTH | 5.000 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW | | FIRST FLAT LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | FLAT HEIGHT | 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM | | OVERALL LENGTH | 5.845 INCHES MINIMUM AND 5.890 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 12 OCLOCK | | NONTURN DEVICE RADIUS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 25.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | SHAFT STYLE | ROUND, FLATTED | | SHAFT LENGTH | 0.875 INCHES MINIMUM AND 0.890 INCHES MAXIMUM | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 4 SCREW |
|
|