|
|
|
National Stock Number:
5905-00-078-6333
Federal Supply Class:
5905
National Item Identification Number:
000786333
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 171533 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | 332227 | 36378 | RAYTHEON TECHNICAL SERVICES COMPANY | | 4546 | 44655 | OHMITE HOLDING, L.L.C. | | 747-5484-000 | 13499 | ROCKWELL COLLINS, INC. | | 95J4R0 | 44655 | OHMITE HOLDING, L.L.C. | | 995-5B40HMS | 44655 | OHMITE HOLDING, L.L.C. | | MIL-PRF-26/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-26/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RW67V3R9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RW67V4R0 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | VBE609V3E9 | H0203 | THALES NEDERLAND B.V. | | VC5440HM | 12697 | CLAROSTAT SENSORS AND CONTROLS | | VC544OHM | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 3.900 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 350.0 | | BODY DIAMETER | 0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | BODY LENGTH | 0.834 INCHES MINIMUM AND 1.166 INCHES MAXIMUM | | CUBIC MEASURE | 0.128 CUBIC INCHES | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 6.500 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-26/4 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 350.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 | | TERMINAL LENGTH | 1.375 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 81349-MIL-R-26 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|