|
|
|
National Stock Number:
5905-00-079-5412
Federal Supply Class:
5905
National Item Identification Number:
000795412
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1101-2G10000 | 04454 | SENSOR SYSTEMS, L.L.C. | | 138-082-0001 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 316.0 MINIMUM AND 324.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS 2ND SECTION | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS | | BODY DIAMETER | 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM | | BODY LENGTH | 1.286 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS | | LATERAL RUNOUT | 0.001 INCHES | | OVERALL DIAMETER | 1.387 INCHES NOMINAL | | OVERALL LENGTH | 1.817 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 2 | | SHAFT END PLAY | 0.005 INCHES | | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 288.0 ALL SECTIONS | | TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 DEG ANGULAR ROTATION ALL SECTIONS | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 ALL SECTIONS | | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 8 SOLDER STUD | | UNDERCUT DIAMETER | 0.975 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
|
|