5905-00-079-6281, RESISTOR,VARIABLE,NONWIRE WOUND,

4470-00-079-6280 SEAL RING,NUCLEAR COOLANT SYSTEM

National Stock Number:
5905-00-079-6281

Federal Supply Class:
5905

National Item Identification Number:
000796281

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

41050109-201	96238	DNE TECHNOLOGIES, INC
MILR22097-1	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RJ11AP201	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

ELECTRICAL RESISTANCE PER SECTION	200.000 OHMS SINGLE SECTION
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
BODY HEIGHT	0.280 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
BODY LENGTH	1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
BODY WIDTH	0.235 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.300 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.680 INCHES MINIMUM AND 0.720 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.100 INCHES NOMINAL
FEATURES PROVIDED	NONMETALLIC SHAFT
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL HEIGHT	0.749 INCHES MINIMUM AND 0.998 INCHES MAXIMUM
OVERALL LENGTH	1.254 INCHES MINIMUM AND 1.359 INCHES MAXIMUM
OVERALL WIDTH	0.235 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
MAXIMUM STARTING TORQUE	8.00 INCH-OUNCES
MOUNTING HOLE DIAMETER	0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
MOUNTING METHOD	TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	0.25 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT LENGTH	0.036 INCHES MINIMUM AND 0.077 INCHES MAXIMUM
SHAFT DIAMETER	0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
TERMINAL LOCATION	LOWER ADJACENT SIDE TWO ROWS
TERMINAL LENGTH	0.469 INCHES MINIMUM AND 0.624 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY	3 PIN

Click here to Register for Free 30-day Trial