| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 348.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| BODY DIAMETER | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM |
| BODY LENGTH | 0.885 INCHES MINIMUM AND 0.925 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION |
| LATERAL RUNOUT | 0.004 INCHES |
| MAXIMUM RUNNING TORQUE | 1.10 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES |
| MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE LOCATION | AT 6 OCLOCK |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.002 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 3.5 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 348.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 1 |
| SHAFT BEARING TYPE | SLEEVE |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.004 INCHES |
| SHAFT RUNOUT | 0.00005 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 1.000 INCHES NOMINAL |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 OHMS SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 10001-2615198 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |