| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| BEARING TYPE | SLEEVE SHAFT |
| BODY DIAMETER | 0.90625 INCHES MAXIMUM |
| BODY LENGTH | 1.625 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| CUBIC MEASURE | 4.3346616 CUBIC INCHES |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION |
| MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 480.00 INCH-OUNCES |
| MOUNTING BUSHING LENGTH | 0.3075 INCHES MINIMUM AND 0.3175 INCHES MAXIMUM |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE LOCATION | AT 12 OCLOCK |
| NONTURN DEVICE RADIUS | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| SCREW THREAD DIAMETER | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 1 |
| SHAFT END PLAY | 0.007 INCHES |
| SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| SHAFT LENGTH | 0.78125 INCHES MINIMUM AND 0.84375 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.003 INCHES |
| SHAFT RUNOUT | 0.0005 INCHES |
| SHAFT STYLE | ROUND |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -130.0 TO 130.0 SINGLE SECTION |
| TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 50222-175910 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |