| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS 1ST SECTION AND 40.0 KILOHMS 2ND SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS |
| BODY DIAMETER | 2.031 INCHES MAXIMUM |
| BODY LENGTH | 4.250 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | PANEL SEAL |
| FIXED TAP QUANTITY PER SECTION | 6 2ND SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR AND 2ND SECTION TABLE |
| FUNCTION CONFORMITY PER SECTION | 1ST SECTION TERMINAL BASE LINEARITY AND 2ND SECTION PROPORTIONAL CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.02 TO 0.02 1ST SECTION AND -0.10 TO 0.10 2ND SECTION |
| LATERAL RUNOUT | 0.001 INCHES |
| OVERALL LENGTH | 4.875 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 1.80 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 2.60 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 480.00 INCH-OUNCES |
| MOUNTING METHOD | SHAFT |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
| PILOT DIAMETER | 1.8750 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR ALL SECTIONS |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACE GOLD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL |
| SECTION QUANTITY | 2 |
| SHAFT BEARING TYPE | BEARING |
| SHAFT END PLAY | 0.0025 INCHES |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.625 INCHES NOMINAL |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 288.0 2ND SECTION AND 576.0 2ND SECTION AND 864.0 2ND SECTION AND 1152.0 2ND SECTION AND 1440.0 2ND SECTION AND 2016.0 2ND SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION 2ND SECTION |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 12 TURRET |
| TEST DATA DOCUMENT | 50040-175896 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| UNDERCUT DIAMETER | 1.875 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |