|
|
|
National Stock Number:
5905-00-085-2046
Federal Supply Class:
5905
National Item Identification Number:
000852046
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| GA2N056P504UA | 01121 | ROCKWELL AUTOMATION, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 500.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY DIAMETER | 0.500 INCHES NOMINAL | | BODY LENGTH | 0.938 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | DEVICE DESIGN TYPE | NONTURN AT 3 OCLOCK | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | OVERALL LENGTH | 1.638 INCHES NOMINAL | | MAXIMUM RUNNING TORQUE | 13.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 4.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 180.0 NOMINAL | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.056 INCHES NOMINAL | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | SHAFT STYLE | ROUND | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|