5935-00-087-7451 CONNECTOR,PLUG,ELECTRICAL Index 5940-00-087-7455 TERMINAL BOARD

National Stock Number:
5905-00-087-7454

Federal Supply Class:
5905

National Item Identification Number:
000877454

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
2137110112GENERAL DYNAMICS MOTION CONTROL LLC
2546392-110001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS 2ND SECTION
ELECTRICAL RESISTANCE PER SECTION2.0 KILOHMS 1ST SECTION
ELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS 3RD SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPEDOUBLE ENDED SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER20.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
BODY DIAMETER1.450 INCHES MAXIMUM
BODY LENGTH2.200 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION1 3RD SECTION
FIXED TAP QUANTITY PER SECTION1 1ST SECTION
FUNCTION CHARACTERISTIC PER SECTION1ST SECTION LINEAR
FUNCTION CHARACTERISTIC PER SECTION2ND SECTION 360 DEG SINE-COSINE
FUNCTION CHARACTERISTIC PER SECTION3RD SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50 TO 0.50 ALL SECTIONS
LATERAL RUNOUT0.002 INCHES
MAXIMUM RUNNING TORQUE1.50 INCH-OUNCES
MAXIMUM STARTING TORQUE1.50 INCH-OUNCES
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER1.3070 INCHES MINIMUM AND 1.3170 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
PILOT DIAMETER1.0000 INCHES MAXIMUM
PILOT LENGTH0.0620 INCHES NOMINAL
PILOT DIAMETER RUNOUT0.001 INCHES
POWER DISSIPATION RATING PER SECTION IN WATTS1.2 FREE AIR ALL SECTIONS
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY3
SHAFT END PLAY0.005 INCHES
SHAFT DIAMETER0.2436 INCHES MINIMUM AND 0.2439 INCHES MAXIMUM
SHAFT RADIAL PLAY0.002 INCHES
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND
SHAFT LENGTH0.500 INCHES NOMINAL
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS1000.0 1ST SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS10000.0 3RD SECTION
TAP LOCATION TOLERANCE PER SECTION-10.0 TO 10.0 OHMS 1ST SECTION
TAP LOCATION TOLERANCE PER SECTION-10.0 TO 10.0 OHMS 3RD SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY14 TURRET
UNDERCUT DIAMETER1.187 INCHES MAXIMUM
UNDERCUT WIDTH0.0620 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us