| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 319.0 MINIMUM AND 321.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| BODY DIAMETER | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| BODY LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION |
| LATERAL RUNOUT | 0.001 INCHES |
| OVERALL DIAMETER | 2.099 INCHES MINIMUM AND 2.151 INCHES MAXIMUM |
| OVERALL LENGTH | 1.217 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0680 INCHES MINIMUM AND 0.0850 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.9900 INCHES MINIMUM AND 2.0100 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| PILOT DIAMETER | 1.9360 INCHES MINIMUM AND 1.9370 INCHES MAXIMUM |
| PILOT LENGTH | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT END PLAY | 0.006 INCHES |
| SHAFT BEARING TYPE | BEARING |
| SHAFT DIAMETER | 0.250 INCHES MAXIMUM |
| SHAFT LENGTH | 0.198 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| SHAFT STYLE | ROUND |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-8903 GOVERNMENT SPECIFICATION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 12 SOLDER STUD |
| TEST DATA DOCUMENT | 81349-MIL-R-8903 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| UNDERCUT DIAMETER | 1.9375 INCHES MINIMUM AND 1.9385 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0700 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM |