| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 180.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 12.5 KILOHMS 1ST SECTION AND 8.75 KILOHMS 2ND SECTION AND 8.75 KILOHMS 3RD SECTION AND 35.0 KILOHMS 4TH SECTION AND 50.0 KILOHMS 5TH SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 90.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BODY DIAMETER | 0.775 INCHES NOMINAL |
| BODY LENGTH | 2.593 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 1ST SECTION AND -0.55 TO 0.55 2ND SECTION AND -0.55 TO 0.55 3RD SECTION AND -0.30 TO 0.30 4TH SECTION AND -0.50 TO 0.50 5TH SECTION |
| OVERALL LENGTH | 2.593 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 0.90 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 0.7750 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| PILOT DIAMETER | 0.7490 INCHES MINIMUM AND 0.7590 INCHES MAXIMUM |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 5 |
| SHAFT END PLAY | 0.002 INCHES |
| SHAFT BEARING TYPE | BALL |
| SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| SHAFT LENGTH | 0.375 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 6250.0 1ST SECTION AND 4375.0 2ND SECTION AND 4375.0 3RD SECTION AND 17500.0 4TH SECTION AND 25000.0 5TH SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 OHMS ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 20 TURRET |
| TEST DATA DOCUMENT | 06481-910017 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 0.748 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |