| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM |
| ELECTRICAL RESISTANCE | 22.000 OHMS |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| BODY HEIGHT | 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM |
| BODY LENGTH | 1.048 INCHES MINIMUM AND 1.080 INCHES MAXIMUM |
| BODY WIDTH | 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| CUBIC MEASURE | 0.350 CUBIC INCHES |
| III UNPACKAGED UNIT WEIGHT | 13.0 GRAMS |
| INCLOSURE METHOD | ENCASED |
| POWER DISSIPATION RATING IN WATTS | 25.000 FREE AIR |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE SIZE | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -3.000 TO 3.000 |
| STYLE DESIGNATOR | AXIAL TERMINAL (S) |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| TERMINAL LENGTH | 0.188 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 13499-747-8621 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |