| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 343.368 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 2.5 KILOHMS 1ST SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 2.9 KILOHMS 2ND SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BODY DIAMETER | 1.445 INCHES MAXIMUM |
| BODY LENGTH | 1.880 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | SWITCH |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.0003 TO 0.0003 1ST SECTION |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.0007 TO 0.0007 2ND SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| OVERALL DIAMETER | 1.880 INCHES MAXIMUM |
| OVERALL LENGTH | 2.450 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 2.60 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 2.60 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 20.00 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.1 |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.4320 INCHES MINIMUM AND 1.4420 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| PILOT DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0 TO 2.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 349.368 NOMINAL |
| SECTION QUANTITY | 2 |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT BEARING TYPE | BALL |
| SHAFT DIAMETER | 0.1869 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| SHAFT LENGTH | 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND |
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| SWITCH CURRENT TYPE AND RATING IN AMPS | 0.003 DC |
| SWITCH OPERATING POSITION | ANY POSITION OF ROTATION TRAVEL |
| SWITCH TYPE | ROTARY |
| SWITCH VOLTAGE RATING IN VOLTS | 30.0 |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0 TO 400.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 8 TURRET |
| TEST DATA DOCUMENT | 70210-805360 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.310 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |