| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 349.8 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS 1ST SECTION AND 20.0 KILOHMS 2ND SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 65.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BODY DIAMETER | 2.030 INCHES MAXIMUM |
| BODY LENGTH | 2.885 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | SWITCH |
| FIXED TAP QUANTITY PER SECTION | 1 3RD SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION GRAPH AND 2ND SECTION GRAPH AND 3RD SECTION EQUATION AND 4TH SECTION EQUATION |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 1ST SECTION AND -0.25 TO 0.25 2ND SECTION AND -0.01 TO 0.01 3RD SECTION AND -0.00035 TO 0.00035 4TH SECTION |
| LATERAL RUNOUT | 0.004 INCHES |
| OVERALL LENGTH | 3.625 INCHES NOMINAL |
| MAXIMUM STARTING TORQUE | 2.60 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.1 |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| PILOT DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0 TO 2.0 1ST SECTION AND -2.0 TO 2.0 2ND SECTION AND -5.0 TO 5.0 3RD SECTION AND -2.5 TO 2.5 4TH SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 4 |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT BEARING TYPE | BALL |
| SHAFT DIAMETER | 0.1869 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| SHAFT LENGTH | 0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| SWITCH CURRENT TYPE AND RATING IN AMPS | 0.005 DC |
| SWITCH OPERATING POSITION | START OF ROTATION |
| SWITCH TYPE | ROTARY |
| SWITCH VOLTAGE RATING IN VOLTS | 28.0 |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 75.4 3RD SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 DEG ANGULAR ROTATION 3RD SECTION |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 15 TURRET |
| TEST DATA DOCUMENT | 70210-805361 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.880 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |