| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 345.0 MINIMUM AND 355.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 1.890 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 93.0 SINGLE SECTION |
| BODY DIAMETER | 0.875 INCHES MAXIMUM |
| BODY LENGTH | 0.566 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION |
| LATERAL RUNOUT | 0.001 INCHES |
| OVERALL LENGTH | 1.670 INCHES MINIMUM AND 1.770 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 0.085 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.10 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 0.8750 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER RUNOUT | 0.00200 INCHES |
| PILOT DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| PILOT LENGTH | 0.0230 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT BEARING TYPE | SLEEVE |
| SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| SHAFT LENGTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.004 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SPECIAL FEATURES | PIN INSERTED THROUGH SHAFT WITHIN 10 DEG AT CW ELECTRICAL POSITION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -260.0 TO 260.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 TURRET |
| UNDERCUT DIAMETER | 0.875 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |