5905-00-115-8076, RESISTOR,VARIABLE,WIRE WOUND,NON

5905-00-115-8074 RESISTOR,VARIABLE,WIRE WOUND,NON

5905-00-115-8077 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-115-8076

Federal Supply Class:
5905

National Item Identification Number:
001158076

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

202-107HS200	0EBU2	VAMISTOR/WESTON DIV OF VAMISTOR CORP OF TENNESSEE INC
202-107HS200	94271	LOCKHEED MARTIN CORP
3290P1-201	80294	BOURNS INSTRUMENTS INC
719123-1	05869	RAYTHEON COMPANY
GVL20404-1	08241	LOCKHEED MARTIN CORP LOCKHEED MARTIN MISSION SYSTEMS

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	9000.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION	200.000 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION
BODY HEIGHT	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
BODY LENGTH	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES
BODY WIDTH	0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.100 INCHES NOMINAL
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.414 INCHES MINIMUM AND 0.424 INCHES MAXIMUM
OVERALL HEIGHT	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
OVERALL LENGTH	0.390 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
OVERALL WIDTH	0.430 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY	3
MOUNTING HOLE DIAMETER	0.074 INCHES MINIMUM
MOUNTING METHOD	UNTHREADED HOLE AND SLOT
MOUNTING SLOT WIDTH	0.074 INCHES MINIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL
SECTION QUANTITY	1
SHAFT LENGTH	0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM
SHAFT DIAMETER	0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
TERMINAL LENGTH	0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	08241-GVL20404 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial